#Amd processor temp monitor install#
#Amd processor temp monitor serial#

CoolerControl - A program to monitor and control your cooling devices.Netdata - Web based system monitor ( netdata).xsensors - X11 interface to lm_sensors.Monitors motherboard and CPU (using lm-sensors), Nvidia GPUs (using XNVCtrl), and harddisks (using hddtemp or libatasmart). psensor - GTK application for monitoring hardware sensors, including temperatures and fan speeds.There are a variety of front-ends for sensors data. Minimum Four Activate Window Delay (tFAW) 30.000 ns Minimum Read to Pre-charge CMD Delay (tRTP) 7.500 ns Minimum Write to Read CMD Delay (tWTR) 7.500 ns Minimum Active to Auto-Refresh Delay (tRC) 49.500 ns Minimum Row Active to Row Active Delay (tRRD) 7.500 ns Minimum Write Recovery time (tWR) 15.000 ns Supported CAS Latencies (tCL) 8T, 7T, 6T, 5T

#Amd processor temp monitor serial#

# decode-dimms Memory Serial Presence Detect Decoderīy Philip Edelbrock, Christian Zuckschwerdt, Burkart Lingner,ĭecoding EEPROM: /sys/bus/i2c/drivers/eeprom/0-0050īanks x Rows x Columns x Bits 8 x 14 x 10 x 64 Once installed, load the at24 or eeprom (deprecated) kernel module.įinally, view memory information with decode-dimms.

#Amd processor temp monitor install#

To read the SPD timing values from memory modules, install the i2c-tools package. (crit = +0.0☌, hyst = +0.0☌) Reading SPD values from memory modules (optional) # echo jc42 0x19 > /sys/bus/i2c/devices/i2c-0/new_deviceĪfter that your ram sticks temperature will be visible:Īdapter: SMBus PIIX4 adapter port 0 at 0b00 This process consists of writing the module_name and address to smbus_path.

You need to tell the module which addresses to use. To read the temperatures of RAM sticks, we need the jc42 kernel module loaded. The address 0x18 and 0x19 are the DIMMs temperature sensors. In this example, there are 2 DIMMs available. RAM SPD's ( serial presence detect) start from address 0x50 and RAM temperature sensors start from 0x18 at same bus. The i2cdetect command will show the devices that are connected to the bus. In the following example, RAM sticks are connected to the bus SMBus 0. I2c-0 unknown SMBus PIIX4 adapter port 0 at 0b00 N/A I2c-2 unknown SMBus PIIX4 adapter port 1 at 0b20 N/A I2c-2 unknown SMBus PIIX4 adapter port 2 at 0b00 N/A Otherwise, its output will appear as follows: I2c-0 smbus SMBus PIIX4 adapter port 0 at 0b00 SMBus adapter I2c-2 smbus SMBus PIIX4 adapter port 1 at 0b20 SMBus adapter # i2cdetect -l i2c-2 smbus SMBus PIIX4 adapter port 2 at 0b00 SMBus adapter To show all the columns, use i2cdetect as root: Once installed, load the i2c-dev kernel module. To find the temperature sensors of DIMMs, install the i2c-tools package. Answering YES also automatically starts the service. Note: A systemd service is automatically enabled if users answer YES when asked about generating /etc/conf.d/lm_sensors. Ln -s '/usr/lib/systemd/system/lm_rvice' '/etc/systemd/system//lm_rvice' * Chip `Intel digital thermal sensor' (confidence: 9)īusdriver `i2c_nforce2', I2C address 0x4cĬhip `Winbond W83L771AWG/ASG' (confidence: 6)ĭo you want to overwrite /etc/conf.d/lm_sensors? (YES/no): Now follows a summary of the probes I have just done. Some south bridges, CPUs or memory controllers contain embedded sensors.ĭo you want to scan for them? This is totally safe. It is generally safeĪnd recommended to accept the default answers to all questions, To load to use lm_sensors most effectively. # sensors-detect This program will help you determine which kernel modules you need

When the detection is finished, a summary of the probes is presented. This will create the /etc/conf.d/lm_sensors configuration file which is used by lm_rvice to automatically load kernel modules on boot. The 'safe' answers are the defaults, so just hitting Enter to all the questions will generally not cause any problems. It will ask to probe for various hardware. See #Laptop screen issues after running sensors-detect. Warning: Do not use anything other than the default options (by just hitting Enter), unless you know exactly what you are doing.